PE Wax, Calcium Stearate, Light Stabilizers, Antiv

,Polyethylene Wax Product: PE Wax CH—100 Physical Appearance: Powder, Microbead and Flake Specifications: Type No. Softening point,°C Acid value(mg.KOH/g) CH-100 100-110 ≤0.050 Property: White powder, microbead, or flake, non-toxic, concentrated distribution of molecular weight, specific gravity about 0.9 with high softening point but low fusion viscosity. It has good dispersion and fluidity, good electrical property and demoulding property also with good light-resistant and chemical-resistant properties. It is soluble with polyethylene, polypropylene, polyvinyl acetate, ethylpropyl rubber, butyl rubber, etc. Thesolubility is lower with polymethyl -methacrylate, polystyrene, ABS, PVC, etc. It is soluble in aromatic hydrocarbons. Polyprolylene Wax Product: PP Wax Physical Appearance: Powder, Microbead and Flake Specifications: Type No.Melting point, °CMeshPP-200130-140≤ 60PP-201145-155≤ 60PP-202155-165≤ 60PP-203165-175≤ 60Property: White powder, microbead. PP Wax is characterized by high melting point, low smelting viscosity and good lubrication and good dispersion, specially suitable for polyolefin processing. ErucamideProduct: Erucicamide Molecular formula: C22H45CONH2 Property: White powdery, flaky or granular product, non-toxic, insoluble in water, soluble inethanol, ether and many organic solvents. Specific gravity about0.98,with specialsurface lubricant action. The outer lubricant action is very good, especially when used with other lubricants as producing significant coordination effects. It has strong adhesive-prevention, anti-adhesive, anti-static properties and good dispersion. Though it is compatible with polyolefin under high temperatures, the compatibility will be greatly decreased when the temperature islowered, so it should be taken care of in the applications. Item Specification Grade I Melting point °C 76 86 Amide content ≥80% Acid value (mg KOH/g) ≤2.0 Iodine number (gI2/100g) 70 80 Color(Hazn) ≤500# Moisture ≤0.8% Calcium Stearate Properties: White fine powder, insoluble in water. When mixed with hot, strong mineral acids, It is decomposed into stearic acid and corresponding calcium salts. Non-toxic matter. Avoid moisture. It can be used as PVC stabilizer and lubricant. Technical index: Index name Index Grade Top grade First grade Qualified product Melting point °C≥ 149-155 ≥140 ≥125 Ca % 6.5±0.5 6.5±0.6 6.5±0.7 Loss on heat % ≤ 2.0 3.0 3.0 Free Fatty Acid(as stearic acid )%≤ 0.5 0.5 0.5 Fineness(thr. mesh 200)%≥ 99.5 99.0 99.0 ANTIOXIDANT JX-168 AND 702 ANTIOXIDANT 626 and697 ANTIOXIDANT JX-1010 andMD-1024 ANTIOXIDANT JX-1076 andJX-1098 ANTIOXIDANT 2246 AND3114 ANTIOXIDANT B215 andB225 ANTIOXIDANT DLTDP andDSTDP Light Stabilizer 944and 622 and 783 Light Stabilizer 770 and292 ULTRAVIOLET ABSORBENT UV-326, UV-327, UV-328, UV-329 and 531 (81)